Tooling Blocks simultaneously provide multiple faces to hold components accurately in vertical plane for machining on Horizontal machining centres. Upon indexing of table a new face with new components is obtained for machining resulting into significant reduction of downtime by elimination of multiple set ups. Pallet mounting tooling blocks also enable simultaneous loading and unloading of multiple fixture plates thereby reducing total set up time. Tooling Blocks can also be used for vertical clamping of components on Horizontal Boring Machines, Milling Machines, Horizontal Jig Mills etc.

Salient Features

  • Made from stress relievd plain close grained gray cast iron conforming to Grade FG: 220 of IS: 210 (equivalent to GG25/F T25/ 35-A). Higher grades also offered on request.
  • Machined / Hand scraped surface finish.
  • M16 tapped holes / helicoil inserts, vertical tenon slots/edge locator tapped holes / coolent drain holes, can be offered upon request.
  • Bottom base can be provided with counter bored holes for fixing / clamping on machine pallet, upon request.
  • Working faces flat, Square and parallel within 25 microns (0.001″) over 300mm (12″).
  • Milled Tooling Blocks also offered with suitable allowance (extra metal) for final finish machining on user’s own machining centres, on request.
  • Special features, if required, can also be offered.


Standard Sizes of Tooling Blocks (Plain Type)

Square (Plain)
TBSP - 4050400250500404Ø1818H8110145225
TBSP - 5060500350600404Ø1818H8150175275
TBSP - 6370630450700408Ø1818H8200215340
TBSP - 8080800500800408Ø1818H8270265425
Rectangular (Plain)
TBRP - 4050400150500404Ø1818H8110145225
TBRP - 5060500200600406Ø1818H8150175275
TBRP - 6370630250700406Ø1818H8200215340
TBRP - 8080800300800406Ø1818H8270265425
Square (With holes)
TBSH - 405040025050040M164Ø1818H8110145225
TBSH - 506050035060040M164Ø1818H8150175275
TBSH - 637063045070040M168Ø1818H8200215340
TBSH - 808080050080040M168Ø1818H8270265425
Rectangualr (With holes)

*Optional Features